Firewall Settings
PC Matic does not include a firewall, but if you’re using a third party firewall you may need to configure it to ensure that our program can connect properly to our servers. You will find several different configurations below depending on the type of firewall you are currently using.
Please set your firewall to allow the following:
- Port 80 (http) and 443 (https) must be open outbound Protocols - http, https, and wss.
- Port 5900 must be open inbound/outbound (for remote access over VNC)
- Port 5500 must be open inbound/outbound (for remote access over VNC)
These are the primary communicative ports for the following:
Domains
pcpitstop.com
pcmaticservice.com
pcmatic.com
Sub Domains
devices-api.pcmaticservice.com
cve-api.pcmaticservice.com
documentation.pcmatic.com
www.pcpitstop.com
api.pcpitstop.com
portal.pcpitstop.com
defs.pcpitstop.com
files.pcpitstop.com
supershield-files.pcpitstop.com
supershield.pcpitstop.com
utilities.pcpitstop.com
switchboard.default.pcpitstop.com
proxy-vnc.pcpitstop.com (ports 5900 and 5500)
geoip.pcpitstop.com
software.pcpitstop.com
logfiles.pcpitstop.com
satellite1.pcpitstop.com
satellite2.pcpitstop.com
satellite3.pcpitstop.com
satellite4.pcpitstop.com
satellite5.pcpitstop.com
satellite6.pcpitstop.com
satellite7.pcpitstop.com
wss://satellite2.default.pcpitstop.com
wss://satellite3.default.pcpitstop.com
wss://satellite4.default.pcpitstop.com
wss://satellite5.default.pcpitstop.com
wss://satellite6.default.pcpitstop.com
wss://satellite7.default.pcpitstop.com
If you prefer to utilize IP addresses, you can get a list of the current CloudFlare Subnets that you will need to allow by clicking the link below: